Posted on Leave a comment

Insta360 invisible drone – first hand feedback

Do you remember this set up?

I bought Insta360 invisible drone on Black Friday sales last year, despite the not so good reviews. The reviews were not so good for few reasons. I mentioned them in the post here. Main one was that the system was causing GPS loss. Although I prefer to fly with GPS, being a qualified pilot I am able to fly in non GPS mode, so I did not mind so much. There were other concerns, like lack of ability to do what the set up is supposed to do, quality of flight and wear on the drone, quality of footage.

I decided to give it a go, because I like testing new concepts. Having couple of Insta360 cameras I knew the quality of their cameras is very good. If the set up did not perform well as aerial mode, I was going to rebuild it, or convert to normal 360 camera. The two lenses together with the core module and battery can function without the aerial contraption that holds it on the drone. I was considering the FPV version, but it was not available in South Africa at the time. Being quite impatient when it comes to my “toys” I did not want to wait.

Insta360 One R aerial mod for Mavic Pro


So – how did it perform?

Quite excited, I immediately put it on my drone and send it in the air. The flight wasn’t too bad. GPS kept coming and going, but the drone was relatively controllable. Drone was holding the position – although only with 6 satellites. The set up is front heavy, I had to hand launch it, otherwise it would tip over. The flight is not as smooth as without it (not a surprise). From my logs it was clear that the motors we under some strain.

After taking some footage, I looked at it and… I ABSOLUTELY HATED IT! Stitching was bad and videos suffered from jello that was quite annoying. For a while I thought that everyone saying how bad this product was was right. Even that particularly rude (and lacking 360 videography knowledge) admin of one of DJI forums, that called me a sucker.

I put it away for a while and started to come up with concepts to rebuild it. But you see – I’m also quite new in the 360 and VR field. So I started educating myself on processing of 360 footage to try to make most of what I had. And I read that a lot of stitching and jello is actually fixable. After downloading the footage I re-processed it in Insta360 Studio on my laptop, instead of my iPad. Surprisingly at this stage – I was able to eliminate all stitching errors. I had to fine tune the stitching methods manually. For whatever incomprehensible reason, the default preselected stitching for aerial mode was producing WORST results.

Stitching is on the horizon line. It is invisible after fine tuning the stitch settings. No drone either 🙂 The stitch quality is maintained through most of the video . Unedited photo from video footage.

For photography and time lapse , this really is a great product. As good as regular Insta 360 One R. The jello effect in videos is whole another story – it has as much to do with the settings of the camera, as it has with how the camera is attached to the drone. But with 360 camera attached at the bottom of the drone, I have less of a jello. With this set up one lens is on top and the other at the bottom – fixed directly to the drone. This causes some vibration. I’m surprised that Insta360 did not come up with some sort of dampers to absorb the vibration. Overall, to certain degree, jello can be fixed in warp stabilizer in Premiere Pro and few other video editors – I have not managed to do it yet though. Below footage is completely unstabilised and suffering from all the jello. It was actually shot at 30fps, which adds to the jello. It is better to shoot 360 video at 50 or 60 fps.


Who is this set up good for?

The fact that the drone with this “jacket” is prone to losing GPS, clearly points that it is not for everyone. Certainly not for typical DJI pilot (hence the worse opinions coming from the mentioned DJI forum). It is also not for someone who wants instant good results, as fine tuning all those settings can be quite tedious. But unless you are prepared to hang the 360 camera from the drone and later remove the drone from footage in post production (which also takes some time and tweaking to make it good and natural), there are not many other options.

For people that are using the footage on social platforms in form of “tiny planets”, jello and even stitching errors are not going to be visible. Even with reframed videos, you can make jello less noticable visible by directing focus onto the action. Where you really don’t wand the distraction in form of jello and stitching errors, is when you post to 360/ VR platforms. For those platforms you will need to make effort to fix the footage. Either by removing the drone from it (unless you really want it there…) or by fixing the jello in post production.

Overall – I grew to like this awkward looking contraption on my drone and I do use it, although in my view the product is unfinished. I think that Insta360 still has some work to do on making it better and more independent from additional work processes after the footage is taken. They seem to be heading in the right direction though!

If you would like to give Insta360 products a try (not just this one) and find my blog useful, please use my affiliate link. And, by the way – Insta360 One RS is out 🙂 have a look below!

https://www.insta360.com/sal/one_rs?insrc=INR60U2

Posted on Leave a comment

Insta360 invisible drone (mis)fortunes

In the last couple of years Insta360 has truly conquered the consumer market of 360 photography. They successfully released some staple models ranging from entry level Insta360 Go, through more advanced Insta360 One R and Insta360 One X2 (that are supported by professional platforms such as Matterport) to fully professional Insta360 Pro and Titan cameras. So how about invisible drone set up? The kind of set up where camera and the drone are not visible (to self) same as tripod is not visible in 360 camera shots?

Continue reading Insta360 invisible drone (mis)fortunes
Posted on Leave a comment

Insta360 Black Friday sale – awesome 360 camera gear

https://store.insta360.com/BlackFriday?insrc=INR60U2

In the last few years Insta360 has truly conquered the consumer market of 360 photography. In those years they released some staple models ranging from entry level Insta360 Go and newer Go 2 through more advanced Insta360 One R and Insta360 One X2 (that are supported by professional platforms such as Matterport) to fully professional Insta360 Pro and Titan cameras. I have two of their cameras (Evo and One R) – they get used very frequently and I’m a huge fan of Insta 360 brand.

https://store.insta360.com/BlackFriday?insrc=INR60U2

Their 360 cameras are extremely versatile for taking photos and videos alike and they offer endless editing possibilities. You can capture footage as 360 and keep it as 360 to be published on platforms that support 360 format. Those include Google Street View, Kuula, Veer or even Facebook.

Alternatively – you can process them into extremely creative “flat” versions that can be published on Instagram or TikTok feed. Whatever your choice is – have a look at incredible Black Friday offers of Insta360 cameras! They even have an Invisible Drone with 360 camera – check it out!

DON’T MISS IT! – click here for those awesome deals! Please, note that you will be buying directly from Insta360, not from our website.

See below examples of 360 images. The first one is the actual 360. The gallery beneath has the “flat’ versions of the various 360 photos I took with my cameras.

Posted on Leave a comment

Drones and 360 cameras

Immersive 360 video from the sky

With the advancement of both, drones and 360 cameras to consumer market and both being available at the fraction of the cost of professional technology, it becomes obvious that creation of fully immersive videos is a mater of rather short time. And drones and 360 cameras go together INCREDIBLY well!

Continue reading Drones and 360 cameras